Common Rail

Therefore, the preferred lower loading and unloading (measuring unit Motorpal), in which the foam is practically not formed. Console modern system management and control booth and fuel equipment sold in the form of tahoschetchika in conjunction with a microcontroller or a more complex form – the personal computer. The main parameters that are displayed on Console: – the value of the fuel pump section – shaft speed fuel pump – fuel pressure after feed pump – the fuel temperature in the tank – the corners of alternating sections of the fuel pump. The controller tahoschetchika additional functions assigned thermal stabilization, stabilization of the drive shaft speed. More complex programmable tahoschetchiki (OOO "STC" Technical diagnostics and precision measurements ") have the potential to store up to 20 parameters (speed, feed value of cycles, the values of the temperature range of fuel).

Console in the form of a personal computer with all the above listed functions has additional services: – easy to use interface and intuitive graphical display of parameters (histograms, gauges, etc.) – tracking parameters in the output of range – carrying and displaying results support the calculations of parameters (the uneven supply sections, virtual beakers and scales, etc.) – the diagnosis on the information-technology-based test plans of different fuel pump – printing fuel pump test results. For the fuel system which has produced all sorts of e-government electronic boxes that mimic the control signals and have their own diagnostic function. On generalized scheme of complex electronic boxes labeled as an electronic control system submission. Some boxes have an interface interfacing with personal computers for additional service, or prefix does not have proper controls, and the whole front end is executed on a PC. Since fuel pump series 136, 179, satisfying the requirements of Euro-3 production YAZTA, equipped with an electromagnetic actuator to drive the rack and diagnosed email attachment LBP.

LBP has an interface with a personal computer and appropriate software for diagnostics. Modern fuel injection equipment imported has a more sophisticated electronic control and, accordingly, more sophisticated diagnostic equipment. Electronic control of feeding is carried out: the elements of the fuel pump inside the dosage (regulators, proofreaders, etc.), in tracts after feeding the injection pump – battery system Common Rail, injectors, injector pump and injectors. Consoles manufactured as fuel equipment manufacturers and independent companies. So well known in the former Soviet space company Open System (Ukraine) produces boxes for the diagnosis: type fuel injection pump camshaft VE, injectors and fuel pump system Common Rail, inline fuel pump type PE, unit injectors (UIS) and others for the diagnosis of fuel pump on should stand consistent assignment of control parameters: shaft speed, fuel, oil and air pressure and other parameters of the pump. So, first of all, for the purchase of diagnostic equipment necessary to start from requirements for the regulation of a specific fuel system.

Related posts:

1. Regulation Mouth Corners Stands Russian 3D stand for measuring and adjusting the wheel alignment the car is already on sale! The cost from 428 000! Company 'TEHNOKAR' has developed and marketed its first home stand to adjust the angles...